Accident identification using gsm and ir

Purpose behind this is that if some other person has consumed the alcohol then it should send SMS. Complete layout of the whole set up will be drawn in form of a block diagram.

arduino based vehicle accident alert system using gps, gsm and accelerometer

If the accident is very normal, or driver has jsut hit the wall in some situations like parking then driver will press the key. Can we enhance this project to add some more modules?

According to this project when a vehicle meets with an accident immediately Vibration sensor will detect the signal or if a car rolls over, and Micro electro mechanical system MEMS sensor will detects the signal and sends it to ARM controller. So when there is no alcohol consumption, low voltage will be there at the output.

Typically, while one instruction is being executed, its successor is being decoded and a third instruction is being fetched from memory.

Accident identification using gsm and ir

So by this way the owner will also come to know the location of vehicle. Despite the "oddball" value, these crystals are readily available and commonly used. With signals from an accelerometer, a severe accident can be recognized. Purpose behind this is that if some other person has consumed the alcohol then it should send SMS. Hence no need to waste time by manual operation and transportation. An automatic alarm device for vehicle accidents is introduced in this paper. Then it sends out SMS to the owner of the car indicating that the driver has consumed the alcohol. This alcohol sensor is analog sensor and as microcontroller is not able to read the analog voltage, so we have used comparator. This is used to adjust the contrast of the display. Download Synopsis of the project Description: Now-a-days lots of accidents happen on highways due to increase in traffic and also due to rash driving of the drivers. This circuit is connected to 9th pin of microcontroller.

The output of alcohol sensor is variable voltage. In case of accident, if the car is hit to some other vehicle or an object then due to the impact the two metal plates will come in contact with each other.

This SMS will also contain the longitude and latitude.

Crash detection using accelerometer

Question : The microcontroller has only 1 rxd and 1 txd pins on p3. And when person has consumed the alcohol, voltage will increase. An accelerometer can be used in a car alarm application so that dangerous driving can be detected. Function of the Key We have provided a key in project. This will inform the microcontroller that this is a very normal accident and then system will not send sms. And at the negative input, voltage from output of analog alcohol sensor is given. Whenever voltage of sensor crosses the threshold voltage level, then comparator gives low output to the microcontroller. This section also comprises of auto power on reset. The HDU character generator ROM is extended to generate 5X8 dot character fonts and 32 5X10 dot character fonts for a total of different character fonts. This alcohol sensor is analog sensor and as microcontroller is not able to read the analog voltage, so we have used comparator.

The research work is going on for tracking the position of the vehicle even in dark clumsy areas where there is no network for receiving the signals. Download Synopsis of the project Description: Now-a-days lots of accidents happen on highways due to increase in traffic and also due to rash driving of the drivers.

accident detection using gps and gsm arduino ppt

For example the person near the driver or backseat. But if driver is not in situation to press the switch or if the accident is really a major accident then driver will not press the key and then system will send SMS.

Rated 7/10 based on 20 review
Download
Arduino Based Vehicle Accident Alert System Project using GPS, GSM and Accelerometer